Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

DIATOOL reamers offer a multi-blade design with unequal spacing of the cutting edges that produces very round and cylindrical bores compared to conventional reamers and at much higher feed rates than single-point tools.

Mono-block reamers are available in both expandable and solid (non-expandable) styles. Compensation for wear can be made by tightening a conical screw in the expandable Mono-block style reamers. Cutting rings offer an expandable modular design. Rapid-set heads are available as a non-expandable, modular option. The cutting rings and rapid-set heads are 100% interchangeable with the major Swiss and German manufacturers.

Standard Diameter Ranges:

Mono-block	5.60mm (.220") to 50.599mm (1.992")
Cutting Rings	17.60mm (.629") to 139.60mm (5.496")
Rapid-set Heads	9.60mm (.378") to 60.00mm (2.362")

 

Click here for Diatool brochure

 

Application News:

Diatool Application News February 2009

Diatool Application News August 2007

Reamtec Application News June 2007

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

Elliptical Deburring Tool

The elliptical deburring tool is used for burr removal on curved or elliptical surfaces created during drilling. Part diameter should be at least four times greater than the cross drilled hole. Tool should run at low speeds.

---

Product Features

Even Chamfer of Elliptical Hole Edges
Uniform Burr Removal
Self-centering and Spring Loaded
Cutters Can Be Resharpened
No Tool Settings Required
Available Sizes 5/32″ to 1″ Diameter
HSS-TiN Coated Cutters Standard

Technical Information

Applications Information
Catalog MCT-2006

Preferred Method of Deburring
Crankshaft Oil Holes

PCD is an extremely strong cutting material. Its hardness offers excellent resistance to wear and abrasion during cutting. For geometrically defined cutting tools, PCD is the most productive and economical. It is ideally suited for machining non-ferrous work pieces and can be subjected to the most extreme machining conditions. CBN is second only to PCD in hardness and is the cutting material of choice in high performance machining of hard ferrous materials such as: steel above HRc40, steel alloys, cast iron, inconel, stellite, etc.

Their tensile strength and hardness put great demands on the design and manufacture of PCD/CBN cutting tools. Only high precision machines, well-executed processes and expertise produce the desired results.

Our manufacturing facilities incorporate state-of-the-art CNC grinding, milling, turning and wire EDM machines. In-process monitoring and measuring equipment secure precision machining on all stations. Elaborate 3-D CAD stations ensure design excellence of the most complex tooling.

Well over 90% of our production represents specially made, customized tooling. With our PCD tooling, our customers get a unique blend of high precision, cost-effective cutting tools with extraordinary benefits:

High Productivity
High Cutting Speeds and feed rates
Very long tool life
High quality part finishes
Minimum machining passes
Design features for tool interpolation
Excellent price/performance ratio

(click here for PCD brochure)