ELLIOTT OUTSIDE-SURFACE CARBIDE ROLLER BURNISHING TOOLS

• Reduce costs by eliminating secondary operations
• Suitable for most CNC turning centers
• Economical tool life with carbide roller
• Produce 5 to 8 microinch finishes (0.13-0.20 micrometer) in one pass

Burnish multiple surfaces after turning

The Outside Surface Carbide Roller Burnishing Tool is mounted in the turret of a CNC turning center.

Part surfaces are turned to an 80 to 100 microinch finish using speeds consistent with good machining practices. The carbide tool them follows the same path at comparable speeds to the turning operation, producing a 5 to 8 microinch finish. This elimnates secondary operations and additional equipment.

The tool is offered in two different designes, one for spherical work and the other for linear surfaces. Rolls are available from stock in four radii: .031", .062", .093" and .125"

**The carbide rolls can be reground several times as a tooling cost savings.

Contact us for further details on our regrind service.**